<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: Quick Start Guide

Welcome to PRTG Network Monitor! This section gives a quick start into PRTG, so you can start monitoring your network right away!

Welcome Screen

Welcome Screen

Setting up monitoring for your network is easy! You only need to download the PRTG installer from the Paessler website and run through the installation wizard, or set up a PRTG in the cloud instance on https://my-prtg.com and install a remote probe in your LAN. Provide some information about your network in the Smart Setup and PRTG will start monitoring your network immediately without any further complicated stumbling blocks! Of course, later on, you can still adjust everything to your needs.

Please see the following quick steps.

Quick Start Guide—Topics

Keywords: